AC 220 Volt 3000K Outdoor Led Roadway Lighting High Power , 180 Lm/w

Quick Details :

 
1> Super bright high power LED Chip Epistar 45mil, high luminous intensity and efficiency .
2> Lamp Luminous Flux (lm): 160 - 180LM per watt
3> Leading heat management , low termperature increase, largely increase the lifetime
4> Super Long life designed driver , MTBF estimated at 50,000 hours.
5> 3 Years warranty after selling . we replace for free of charge during warranty period.
6> Green, environmental friendly , non-pollutant , with no pollutant elements like Pb, Hg , completely harm to the environment.
 

General Information of LED Outdoor Lighting LED Street Light 60W :

LED Outdoor Lighting 60W LED Street Light is an integrated light, good for energy saving and environmental protection . Using LED as light source , sealed on a panel and then assembled to the LED panel with a heat sink to become an integrated lighting fixture. The primary appeal of LED street lighting is energy efficiency compared to conventional street lighting fixture technologies such as high pressure sodium (HPS) and metal halide (MH)

The lamp body of the product is made of high quality aluminum alloy materials. With the big area of the surface fin structure and its ultra fast cooling rate, the heat dissipation performance of the lamp is greatly improved. The adopted high efficient LED light source saves energy significantly by its low light decline rate and long service life. The driver part adopts the constant current drive power supply with high accuracy, high efficiency, stable performance and no stroboscopic.

Product Specifications :

Features of LED Outdoor Lighting LED Street Light 60W :

  1> With  special heat sinking design , perfectly fitted with the driver housing , able to conduct the heat effectively so as to guarantee a long life of the power source and lighting source.
  2> Heat sink surface anodized to antisepticise, structure compact and beautiful , IP65 with good dustproof and waterproof capacity.
  3> Obviously energy-saving, able to save over 70% power compared with sodium lamps.
  4> Quick turn on and off , LEDs come on with full brightness instantly. Unlike mercury vapor, metal halide and sodium vapor lamps (commonly used in street lighting), LEDs do not have a problem restarting immediately (hot ignition) following a brief power failure or inadvertent turn off.
  5> With high color rendering index to reflect color truthfully , the color temperature can be adjusted according to different environment requirements . The depressive atmosphere caused by traditional lamps’ over high or overflow color temperature can therefore be avoided, making eyes comfortable so as to improve working efficiency .
  6> The drivers are with constant current and broad voltage input(AC85V-265V) , causing no power net or noise pollution normally associated with Fluorescent lamp starter, not eye-irritating.
  7> With good decorative function, special surface-process techniques, different outlook colors available, easy to install and dismantle with a lot of applications

  Usage Instruction :

1. Before installation, please read carefully the product specification to make sure the operating environment conforming to the conditions.
2. Turn off the switch before connecting to the power.
3. Lamps and lanterns should be installed by a qualified electrician, wiring connection should conforming to the IEE electrical standards or national standards ;
4. This product is suitable for indoor use ;
5. Please do not make the lamp working under the condition of voltage too high or too low for a long time, which will affect the function of normal use and lifespan ;
6. Do not install the lamp inside flammable objects; keep off the lamp with thermal insulation material at any time.
7. Cut off the power when cleaning, replacement, or installing the lamp, to ensure the personal safety;
8. When abnormal work of lamps (self-extinguishing, flashing) happened, please check if the connecting plug and power supply working normal, replace for a new light if they have no problems;
9. Cut off the power before cleaning the lamp! Please do not use any chemical agent, it may discoloration or damage the lamps. Firstly using the soft cloth with soapsuds then clean up with dry cloth.
10. Do not take apart the product to avoid damage any internal components. Take apart any components may void the warranty.

Energy Saving Case of  LED Outdoor Lighting 60W LED Street Light :
 

 Contact Details